China made cleaning solution for jet strips (non-acid recipe) Instructions:

1. Put the jet strip into the water tank;

2. With each 100KG of cleaning solution, to add water at dilution ratio of 100 ~ 150ml, pour this mixed liquid into the water tank until the jet strip is completely immersed;

3. According to the jet strip contaminated degree, to allow the jet strip staying from 4 to 24 hours in the immersion tank, where the liquid temperature is best to control at 40 ~ 50℃;

4. After a good soaking, the jet strip is put into the cleaning machine, where to be rinsed 2-3 times with high-pressure water;

5. The cleaning solution in the immersion tank can be used at least 3 to 4 times, during repeated use of it, if adding some appropriate amount of cleaning solution, the result is even better.

6. The product is biodegradable, pollution to the environment is extremely tiny, and can be discharged conventionally.

Precautions: Avoid contact with eyes and skin, wear protection gloves when handling.